Description
This downloadable terrain contains 7 .stl files. These files contain all the necessary components to print 6 numbered Space Egyptian objective markers, in a single print requiring a build volume of 100mm x 70mm x 50mm. This model can also be printed in individual components and requires a minimum build volume of 35mm x 35mm x 50mm.
All files in this pack have been successfully test printed in PLA using a 0.4mm nozzle, on a well calibrated printer in the orientation they are provided using the slicer setting*:
- Layer Height = 0.1mm
- Temperature = 210℃
- Infill = 15%
- Retraction = 7mm
- Extrusion width = 0.45mm
- Wall thickness = 0.45mm
- Top & Bottom thickness = 0.5mm
- Print Speed = 40mm/second
We highly recommend using a raft or a brim to assist with bed adhesion.
*The setting you will need to get successful prints may vary depending on a variety of different factors including but not limited to, extruder design, filament, ambient conditions, ect.
Reviews
There are no reviews yet.